Thailand.

HOME

JOHN-YOUNG - Baking Oven

Baking Oven

Hot Air Circulation System

Features

Wide application range, perform efficiently.

Simple pilot connections, ignition smoothly.

Excess air, stable flame.

Main burner could use Hi – Low – Off function.

Simple and safety detection.

Strong & long life retention plate with stainless steel.

Wide turn – down ration, usually could be more than 20:1.
External ignition & detection maintenance, simple servicing.

Application

Coating, electroplating industries

: aridity of painting, dehydration.

Fiber industries

: aridity of cotton material, after dyeing.

Food industries

: aridity of noodles, agricultural products, cereal, aquatic products, tea leaves, spray dehydration.

Metal processing, chemical industries

: heat handling furnace, aridity of rubber sticking, synthetic leather, wallpaper, foaming.

Timber industries, leather goods

: aridity of timber, coating, leather products dyeing.

Kiln industries, casting products

: aridity of material, preparation aridity after shaping.
Other air heater or hothouse.    

Burner Dimensions

 Burner Dimensions

Burner type

Kcal/Hr

W (mm)

H (mm)

D (mm) Kg
DAH-10 100,000

150

158

269

9
DAH-20 200,000 302 158 269 14
DAH-30 300,000

454

158 269

20

DAH-40 400,000 607 158 313 25
DAH-50 500,000 759 158 313 30
DAH-60 600,000

911

158 313 35

Burner type

A B C D

øE

DAH-10 90 90 110 110 9
DAH-20 90 90 110 110 9
DAH-30 100 125 140 140 9
DAH-40 150 - 180 70 9
DAH-50 190 - 220 70 9
DAH-60 225 - 255 70 9

Specifications

 Specifications

Burner type

Max flame length Pilot enterance L.P.G. L.N.G.
DAH-10 100,000

150

158 3/4 B
DAH-20 200,000 302 158 1-1/4 B
DAH-30 300,000 454 158 1-1/2 B
DAH-40 400,000 607 158 1-1/2 B
DAH-50 500,000 759 158 2B
DAH-60 600,000 911 158

2B

L.P.G. Pressure:280 mmAq

L.N.G. Pressure:150~200 mmAq

Piping Flow Sheet

Piping Flow Sheet
1 Air Batterfly Valve
2 Combustion Blower
3 Air Pressure Switch
4  Air Pressure Gauge
5 gnition Transforner
6 Main Burner
7 Spark rod
8 Flame rod
9 Visual hole
10 Gas Pressure Switch
11 Gas Pressure Gauge
12  Main Solenoid Valve
13 Control Motor
14 Main Batterfly Valve
15  Main Ball Valve
16 Pilot Solenoid Valve
17 Pilot needle Valve
18 Pilot Ball Valve

Packaging Options

*   Packaged Air Heater
Designed for the necessary air heating during industries processing, especially suitable for use in high temperature combustion chamber. When assembling, set the heater on furnace firstly, then connect gas and switch on.

*   Duct Type Air Heater
This duct type air heater is a compact package built with hot air gas burner. It could be set in the enterance or exit of circle fan, provide different range for the heat from 100,000 to 600,000 Kcal/hr.

 


Infrared Gas Burner

SH-162A

Model Fule Consumption Propane Gas
kg/h
Natural Gas
m3/h
infra-Red Primary Output
 kw (kcal/h)
Q'ty of Plate 
PC
Weight 
kg
Pipe Sizw
B
SH-162A   0.45 0.49 6.3 (5,400) 16 (4x4) 8.0 3/8


Oil Indirect Hot Air Producing System

 

 

Suitable Industries For Applications:

System Advantages:

1. Coating Drying Industry, Water Knife Drying Industry, Fiber Drying Industry, Papermaking Industry
2. Wood Drying Industry, Ceramic Forming Drying Industry, Glasses Drying Industry.
3. Batteries Drying Industry, Electronic Accessories Drying Industry.
4. Greenhouse of Plant in Frigid Area

 

1. Indirect heating can make clean air and decrease the discharging of waste air in oven.
2. The drying industries that need the clean air are the best choice.
3. Lower operating cost than using electricity system.
4. Low operating cost and easy to maintain.

 

 
Specifications of Oil Indirect Hot Air Producing System
Type Diesel Fuel Burning Volume of Fuel Burning

L/Hr

MAX. Heat Exchanged
104 Kcal/hr
Heat Exchanged Circling
Horsepower of Windmill
Heat Exchanged Circling
Wind Volume of Windmill
Temperature Controlling Using Temperature
IDAH-15 LT-20 HW 10~20 15 1.5 Kw 60 CMM Hi-Lo-OFF below 250 Deg C
IDAH-20 LT-30 HW 15~30 20 2.2 Kw 90 CMM Hi-Lo-OFF below 250 Deg C
IDAH-30 LT-51 HW 25~45 30 3.7 Kw 120 CMM Hi-Lo-OFF below 250 Deg C
IDAH-40 LT-61 HW 25~55 40 5.5 Kw 80 CMM Hi-Lo-OFF below 250 Deg C
** can be designed and manufactured according to customers’ requirements


JOHN YOUNG ENTERPRISE CO., LTD.

NO.5, NANYUAN RD., ZHONGLI INDUSTRIAL PARK, TAOYUAN CITY 32063, TAIWAN
TEL: 886-2-8753-4183     FAX: 886-2-8753-4185       service@john-young.com


Contact Us  |  TaiwanChina  |  Thailand  |  Singapore & Malaysia